Compression-Distraction Osteosynthesis Pins SKDO-MT-Kazan According to TU 9438-027-40686779-2002

Compression-distraction osteosynthesis pins SKDO-MT-Kazan are manufactured in accordance with TU 9438-027-40686779-2002.

1. Smooth Pins, Spear Point - CRK (Pin Codes):

Diameter 0.8 mm, Length (mm): CRK08.100
Diameter 1.0 mm, Length (mm): CRK10.100, CRK10.150, CRK10.200
Diameter 1.2 mm, Length (mm): CRK12.100, CRK12.150, CRK12.200
Diameter 1.5 mm, Length (mm): CRK15.100, CRK15.150, CRK15.200, CRK15.250
Diameter 1.8 mm, Length (mm): CRK18.250, CRK18.300, CRK18.350, CRK18.400
Diameter 2.0 mm, Length (mm): CRK20.150, CRK20.200, CRK20.250, CRK20.300, CRK20.350, CRK20.400

2. Smooth Pins, Chisel Point - CRP (Pin Codes):

Diameter 0.8 mm, Length (mm): CRP08.100
Diameter 1.0 mm, Length (mm): CRP10.100, CRP10.150, CRP10.200
Diameter 1.2 mm, Length (mm): CRP12.100, CRP12.150, CRP12.200
Diameter 1.5 mm, Length (mm): CRP15.100, CRP15.150, CRP15.200, CRP15.250
Diameter 1.8 mm, Length (mm): CRP18.250, CRP18.300, CRP18.350, CRP18.400
Diameter 2.0 mm, Length (mm): CRP20.150, CRP20.200, CRP20.250, CRP20.300, CRP20.350, CRP20.400

3. Smooth Pins, Drill Point - CRV (Pin Codes):

Diameter 0.8 mm, Length (mm): CRV08.100
Diameter 1.0 mm, Length (mm): CRV10.100, CRV10.150, CRV10.200
Diameter 1.2 mm, Length (mm): CRV12.100, CRV12.150, CRV12.200
Diameter 1.5 mm, Length (mm): CRV15.100, CRV15.150, CRV15.200, CRV15.250
Diameter 1.8 mm, Length (mm): CRV18.250, CRV18.300, CRV18.350, CRV18.400
Diameter 2.0 mm, Length (mm): CRV20.150, CRV20.200, CRV20.250, CRV20.300, CRV20.350, CRV20.400

4. Pins with Stop, Spear Point - CCK (Pin Codes):

Diameter 1.2 mm, Length (mm): CCK12.150, CCK12.200
Diameter 1.5 mm, Length (mm): CCK15.150, CCK15.200, CCK15.250, CCK15.300
Diameter 1.8 mm, Length (mm): CCK18.250, CCK18.300, CCK18.350, CCK18.400
Diameter 2.0 mm, Length (mm): CCK20.350, CCK20.400

5. Pins with Stop, Chisel Point - CCP (Pin Codes):

Diameter 1.2 mm, Length (mm): CCP12.150, CCP12.200
Diameter 1.5 mm, Length (mm): CCP15.150, CCP15.200, CCP15.250, CCP15.300
Diameter 1.8 mm, Length (mm): CCP18.250, CCP18.300, CCP18.350, CCP18.400
Diameter 2.0 mm, Length (mm): CCP20.350, CCP20.400

6. Pins with Stop, Drill Point - CCV (Pin Codes):

Diameter 1.2 mm, Length (mm): CCV12.150, CCV12.200
Diameter 1.5 mm, Length (mm): CCV15.150, CCV15.200, CCV15.250, CCV15.300
Diameter 1.8 mm, Length (mm): CCV18.250, CCV18.300, CCV18.350, CCV18.400
Diameter 2.0 mm, Length (mm): CCV20.350, CCV20.400

To purchase Compression-Distraction Osteosynthesis Pins SKDO-MT-Kazan according to TU 9438-027-40686779-2002, please fill out a request form and send it to Адрес электронной почты защищен от спам-ботов. Для просмотра адреса в вашем браузере должен быть включен Javascript. or use the order form on our website.

Back